LPP

Material Safety Data Sheet

Date : 15/01/2001

1. Identification of product :
Trade name : Adhesive BU43
Type of use : Water based adhesive for print lamination
Corporate Name : LPP technopolymer
............... Z.A.E Marcel Dassault - n°17
............... 93140 BONDY

France
...............Tél : (33)(0)1.55.89.90.89.......Fax : (33)(0)1.48.02.40.60
............... e-mail : lpp@wanadoo.fr

2. Composition / Information on components :

Acrylic copolymer in emulsion

3.Identification of dangers
Main dangers : In normal conditions of use, this product does not occurs hazard of acute poisoning.

Specific risks : No specific risk of explosion or flammability
Main symptom : Sensitivity effects.

4.First aid
Contact with eyes : Immediately wash thoroughly with water while parting eyelid during at least 15 minutes and consult a specialist.

Contact with skin : Eliminate excess of product, wash with soap and rinse thoroughly with water.

Ingestion : Consult a doctor.

5.Fire safety precaution
Methods of extinguishment : CO2, foam, dry chemical powder, water fire extinguisher. Water can be used to cool closed containers in order to prevent an increase in pressure.

Specific risks : Possible formation of dangerous by-products in case of uncomplete combustion.

Specific methods of intervention : Cool containers of storage near fire.

Protection of persons intervening : Wearing of an autonomous respiratory mask.

6. Measures to take in case of accidental dispersion :

Individual precautions : avoid contact with skin and eyes
Precautions for protection of environment : Do not empty into drains.

Cleaning methods : Absorb dumpings with sand, earth or any convenient suitable material. Put it in a container for disposal.

7. Handling and Storage
Handling :
Technical measures : Avoid to open drums in a place without ventilation in order to avoid concentrated steams.
Precautions : Do not swallow. Do not put in contact with eyes. Avoid repeated or extended contact with skin.
Instructions for use : To ensure sufficient ventilation.

Storage Conditions:
Stock between 5°C and 40°C. Protect from frost.

Keep containers hermetically closed before and after use. Use storage area with a waterproof retention floor.

Packaging materials : Polyolefine, epoxy covered metal.

8. Checking of exposure / individual protection :
Equipment for individual protection :

- Respiratory protection : Yes, if sprayed

- Protection of hands : Protection gloves ( made of PVC or rubber ).

- Protection of eyes : Protective goggles / mask.

- Protection of skin/body : wear suitable protective clothing. Keep away from foodstuffs, drinks and tobacco. Wash hands before breaks and at end of works. Keep working clothes separate. Take off immediately all contaminated clothing.

Checking parameters :

Butyl Acrylate N° cas 141-32-2....VME : 10PPM : 55mg/m3
Vinyl Acetate N° cas 108-05-4..........VME : 10PPM : 30mg/m3
Methyl Methacrylate N° cas 80-62-6....VME : 100PPM : 410mg/m3
Hydrazine N° cas 302-01-2....VME : 0,1PPM : 0,10mg/m3
Acétaldéhyde N° cas 75-07-0....VME : 100PPM : 180mg/m3

9. Physical and Chemical Properties
Physical appearance :

shape : liquid

colour : white

smell : low
pH = 5
Temperature de decomposition = -
Melting point : > 100°C
Temperature of self-inflammation = n.a

Characteristics of explosivity : n.a
Pressure of steam = 2 k Pa at 20°C
Density of steam = -
Density = 1,05 g/cm3 at 20°C
Solubility : Miscible with water.

10. Stability and Reactivity :

Stability : Substance will not bear combustion except if water evaporated.
Dangerous decomposition product : Carbon monoxide, carbon anhydride.


11. Toxicological Data :
Strong toxicity : Weakly noxious by inhalation
Local effects : Risk of irritation if contact with skin, slightly irritationg if contact with eyes.
Sensitivity : Can induce sensitivity if contact with skin.

Chronic toxicity :

Long term toxicity :

Specific effects :

12. Ecological Data :
Mobility :
Persistence/Degradability : Weakly biodegradable
Bioaccumulation :
Ecotoxicity : Do not dispose in the environment without a flocculation / chemical precipitation. Preparation is not dangerous.
Others : Use of tangential microfiltration technics is possible.

13. Considerations concerning disposal :
Waste must be treated in accordance with local and national regulation.

Disposal of aqueous stage : product can be removed by absorption on activated sludge.

14. Data Concerning Transport :

Transport ONU n°........ R.T.M.D.R .......RID/ADR.......IMDG.......OACI
........................................................................................sea.... .. air
Class ...................................
Group, figure or page. ......
Label

Hazard code........................
Material code...................

Declaration for land shipment :

Declaration for sea shipment :

Declaration for shippment by air :

Other information :

15. Regulation Data :
Labelling in accordance with the EEC directive

16. Other Data :
The data given here is based on current knowledge and experience. The purpose of this Safety Data Sheet is to describe the products in terms of their safety requirements. The data does not signify any warranty with regard to the product properties.